Not Available to Ship to California
If you own a Dodge with a Cummins Diesel, you need a Smarty Programmer! Ask any true diesel enthusiast with a Cummins which programmer makes the most power, has the best tunes, and gives the biggest increases in fuel economy, and they will all tell you the same thing – Get A Smarty! The all new MADS Smarty Touch Programmer with 4.3" color touch screen is the fastest display and tuner on earth! The Smarty Touch features a dual CPU design with the Smarty Touch Display and Smarty Touch Controller each with its own CPU.
One CPU drives the display for the graphics & user interface and the other drives the controller for communicating with the ECM. This enables the fastest display start up time in the industry, just four seconds! It also features the fastest PID refresh speed in the industry and the fastest ECM download. The ECM download is up to three times faster than the competition; a typical ECM update takes 1.5 to 6 minutes, depending on the model year. The large 4.3" touch display has four dashboards with each configurable with five different gauge layouts. The gauge range is freely configurable and two audible and/or visible alarms (high and a low range) can be configured for each PID. This is the most advanced tuner that Smarty has ever made.
The Smarty Touch Programmer for your 1998.5 to 2002 Cummins comes with ten different software settings. The published power gains from these softwares comes from testing true stock trucks on a Mustang Dyno. All horsepower numbers were rounded down. Each setting has modified torque management and the throttle response is greatly improved but set to a safe limit. These tunes are designed to be safe for your transmission and the rest of the driveline. Find out for yourself why Smarty is the programmer of choice for Cummins diesel owners – get yours today!
Software # 0 – The half power setting is useful whenever reduced power is desired or when you have to make sure that no smoke is produced.
Software # 1 – This fuel saver software produces average fuel savings of +2 MPG! Heavy Towing is not recommended with this software due to the aggressive nature of the tune.
Software # 2 – Increases fuel delivered by the ECM and includes boost fooling
Software # 3 – Same as software # 2 but timing has been added.
CaTCHER Softwares # 4 to # 9 – The even numbered softwares are identical to the odd numbered ones, except for the timing. The softwares without added timing are intended for use with timing adding boxes.
Many customers ask “How much horsepower will the CaTCHER software add to my 98.5-02 engine?” The short answer is that it depends upon the mods done to your engine. On a stock engine typical gains are 60 horsepower at the rear wheels. With upgraded injectors the Hp gain increases. How much depends upon your injectors, turbo, intake, exhaust, etc. The best mod combined with the CaTCHER is a good set of injectors.
If you feel that you absolutely want to “stack chips” The CaTCHER stacked with a fuel only box provides the highest Hp gain. More than what a timing & fuel box that can’t be stacked with anything will provide.
Smarty Communication Module (ComMod) – Sold Separately
This is an optional additional Bus expansion port for the Smarty Touch.
What does it do?
When installed to Smarty Touch’s under-dash controller, it allows the communication with the ECM over two distinct CAN Bus channels at the same time. The usual OBD II plug / bus and a secondary under hood service bus used by Cummins for the communication with external modules such as the VGT turbo, Oxygen sensors, etc.
Why is it needed?
1) The Smarty Touch uses the under hood service bus for real time On The Fly (OTF) tuning for all years from
1998.5 to present. (The ComMod is optional for the OTF for all previous years as they become available. )
2) The Smarty Touch uses the under hood service bus to unlock the 2013+ ECM’s.
