PPE Flat Bottom Transmission Pan with Black Finish for 2007.5-2018 Ram 6.7L Cummins with 68RFE Transmission.
PPE’s new flat-bottom transmission pan for the Ram 68RFE transmission is constructed from high-quality cast aluminum.
This pan features internal heat sinks and external cooling fins. These cooling fins, combined with the increased capacity aluminum construction, promote reduced transmission fluid temperatures. Cooler fluid lubricates better which helps increase transmission service life.
This new pan comes with a Neodymium-equipped, 1-inch stainless steel drain plug to remove harmful ferrous particles from the transmission fluid. Kit includes two NPT plugs and access ports for temperature probes. Upgrade the spin-on transmission filter with our PPE 228052150 Transmission Filter which has 57% larger filtration media for the best protection to your transmission.
In testing, we used a 2013 2500 Cummins-powered Ram towing a 13,000 lb travel trailer. We took the pair on a 900-mile loop through city traffic, steep hill climbs as well as wide-open, flat highway runs. Transmission temperatures never went over 200 degrees. After cresting the top of hills, transmission temperatures also dropped much quicker than they did with the factory-installed stamped steel pan.
Unloaded temperatures were consistently 10 degrees (or lower) below those measured with a factory pan.
Note: No filter needs to be purchased due to the change of dimensions from the factory transmission pan. If a new filter is needed, PPE includes the filter in the kit. If a new filter is not needed, then you would just re-use the factory filter.
