Not Available to Ship to California
All-new six-position Edge Revolver chips for the Ford 7.3L diesel can now be controlled by the Insight CTS3! Change the power levels of your chip using the touchscreen of the Insight CTS3 monitor. These kits include the Revolver chip, Insight CTS3, and the new EAS Revolver cable that allows the Insight to connect to the chip. The six-position chip offers adjustable horsepower, up to 140 horses, using Edge’s Insight CTS3 display. Simply pull down the top menu and adjust the power levels or select the Retro Screen which allows switching between multiple power levels on-the-fly!
Edge Revolver Chip Tune Levels:
Level 1: Stock Tune
Level 2: High Idle
Level 3: 50 Horsepower
Level 4: 75 Horsepower
Level 5: 100 Horsepower
Level 6: 140 Horsepower
How to Order an Edge Revolver Chip
You will need some information from your truck before you order an Edge Revolver Chip. First, you will need the “ECU Code” from your truck’s ECU. It is easy to find- just look for your ECU which will be located behind the Driver’s Side Kick Panel where there is a black plug that will have a sticker on the plug that shows the ECU code. In the case that this sticker isn’t there or the plug has been removed then you can look in the engine compartment where the main harness connection connects to the ECU. In some cases you can put your phone down by the connector and take a picture of it to reveal the ECU code. If you can’t see it then you may need to remove the ECU. There will be a large 4 Digit Code there that are 3 letters and 1 number. These “ECU Codes” identify what ECU is in your truck, and they come in groups. Some examples might be NVK2 and NVK4, which share the same tunes which would have the same “Box Code”, but have different ECM codes. You will need to give your ECM code to the dealer that is burning your chip, or buy the chip pre-programmed for your ECM code (or box code family). Here is an example of what your ECM code will look like on the ECM.
Edge Part number 14106-3 is designed for a 2000 Ford 7.3L Power Stroke with a Manual transmission. The Master ECU Code for the 14106-3 is DAC3. This Master ECU code supports the following ECU codes BAW, BIS, DAC, NBD, QEK, VRP, VXY, XPC, and ZHL.