BD Diesel Turbo Cool Down Timer 2 for 2013-2022 Dodge Ram 6.7L Cummins 1081160-D3

Part# 1081160-D3
$351.94 Now $319.95
Qualifies for FREE SHIPPING

Backorder - Ships directly from Manufacturer


Product Description

The Cool Down Timer 2 (CDT2) is designed to keep the engine running when the ignition is turned to prevent turbocharger bearing failure that could occur when the engine is shut down and the turbocharger is still hot. The turbocharger is lubricated and cooled by the engine oil and when the engine is turned off, that oil supply is cut off. If the turbocharger is still hot at shutdown, the remaining oil in the bearing housing will overheat, causing coking of the turbocharger bearings. Over time this coking causes both premature bearing wear and reduced oiling of the bearings.

Allowing the engine to idle gives the turbocharger time to cool down before stopping the supply of lubrication oil which can prolong turbocharger life. Turbochargers rotate at high speeds, often in excess of 100,000rpm under load. If the engine is shut down too quickly after use, the residual oil in the bearing housing will not be sufficient for lubrication and may cause premature bearing wear. A short period of engine idling after use will help to ensure the turbocharger has reached a minimum operating speed before shutting down.

Key Features

  • Kit comes with factory plug-ins for easy installation
  • Extend The Life of Your Turbo
  • Allow Your Engine To Cool Gradually
  • 5 Minute Timeout & Quick Shut Down Functions
  • Works With Security Alarms
  • Comes with Factory Plug-Ins for Easy Installation
  • 12 Month or 24,000 Mile Warranty
  • Comes with Detailed Installation Instructions
  • Reduces Regeneration of Particulate Filter

When the key is turned off, the CDT2 module will keep the power supplied to the ECM/PCM, which will in turn keep the engine running. On late model vehicles the CDT2 keeps most or all of the vehicle ignition system and accessories powered until engine shutdown, on early model vehicles only the engine will remain running. The CDT2 can shut the engine down once the exhaust temperature reaches a set temperature as this is the most effective method of determining a safe shut off point. The CDT2 can also be set to keep the engine on for a fixed time after the key is removed. The suggested shutdown exhaust temperature is below 400°F.

BD Performance has been engineering excellence in performance since 1972. BD is unique among its peers. They design, create, manufacture, re-manufacture and distribute a wide range of products specifically engineered for performance -powered applications. And all this is done in-house. With many decades of experience they have earned their reputation as a quality industry leader.